Weekly review: manufacturing, testing


Are you struggling to keep up with your loan payments? Are you feeling overwhelmed by the amount of debt you have accrued? If so, you may want to consider loan consolidation. At ConsolidationNow, we offer loan consolidation for manufacturer businesses that are struggling to make ends meet. We understand that times are tough, and we want to help you get back on your feet and your debt is concentrated. With our debt consolidation loans, you can get a fresh start and finally breathe easy again!( https://www.kstatecollegian.com/2022/03/08/manage-your-finances-with-payday-loans-tips-for-an-emergency-situation/ )

Chip manufacturer

The chip industry is booming Wall Street Journal report The Intel is in talks to buy GlobalFoundries (GF) for $ 30 billion. In March, Intel got back into the foundry business and positioned itself against Samsung and TSMC at the top and against a multitude of foundries working on older knots.

Intel planned to start its foundry business in its own fabs. But it has to prove a lot. When Intel first got into the foundry business in 2010, it couldn’t run.

Intel could get into the foundry business quickly if it actually takes over GF. However, GF has had its own glitches in execution. In 2018, GF suspended its 7nm FinFET program indefinitely and abandoned plans to pursue technology nodes beyond 7nm. And the merger of Intel and GF would bring some challenges.

TSMC wrote heavily Results for the quarter. The company is also expanding its 28nm capacity in an existing 300mm factory in Nanjing, China according to a report of the Taipei times. TSMC is also considering building a fab in Japan. It is also considering expanding its current fab plans in Arizona, according to the report.

Cadence Design Systems’ Digital Design flow has been optimized and certified to the UMCs 22 nm processes. The processes with the designation 22ULP / ULL are designed for chips in the consumer, 5G and automotive markets. The flow, which includes implementation and signoff technology, enables designs with extremely low power consumption.

SK Hynix has started mass production an 8 gigabit LPDDR4 mobile DRAM based on the 1 anm node using extreme ultraviolet (EUV) lithography. SK Hynix is the second DRAM company to use EUV. Samsung also uses EUV for its newest DRAMs.

Achronix semiconductors, Supplier of FPGAs, and ACE convergence acquisition, a purpose-built acquisition company, have mutually agreed on the termination their merger agreement.

Mobix Labs, a fabless RF components company, has acquired all the assets and intellectual property (IP) of Cosemi technologies, a provider of high-speed connectivity solutions.

dpiX and Mercury systems to have signed a letter of intent which outlines the cooperation between the companies in the development, prototyping and manufacturing for the next generation of displays. dpiX was founded in California in 1999 with support from Department of Defense and private investors. Based in Colorado Springs, Colorado, the company has invested over $ 250 million in a trusted, IP-secure semiconductor manufacturing facility. It is the largest clean room facility for A-Si semiconductors outside of Asia.

General Motors announced a $ 71 million investment to build a new campus in Pasadena, California. GM will open the Advanced Design Center, a move that will increase the center’s capacity and create more jobs in the area. GM’s advanced design teams focus on developing concept and future mobility projects outside the scope of existing production vehicle programs, such as electric cars, Cadillac’s autonomous concept vehicle, vertical take-off and landing aircraft, and a collaborative lunar rover concept Lockheed Martin.

General Motors has sold 688,236 vehicles in the US in the second quarter of 2021, up 40% year over year. The market was supported by strong customer demand but constrained by low inventory levels due to global semiconductor shortages.

VW outlines his new strategy by 2030. VW has earmarked 73 billion euros for future technologies from 2021 to 2025, which corresponds to 50% of the total investment. The share of investments in electrification and digitization will continue to increase.

Fab tools, materials
To innovation has joined that Responsible Business Alliance (RBA) as an affiliate member. As a member of the alliance, Onto Innovation supports the vision and goals of the RBA. The RBA is a non-profit association of companies that are committed to improving the social, environmental and ethical conditions in their global supply chains.

To innovation announced that Steven Roth, senior vice president and chief financial officer, plans to retire in 2022 after the search for his successor is completed. Until then, Roth will remain active as CFO and participate in the candidate evaluation process.

In 2020, Korea’s SK Siltron, a manufacturer of semiconductor wafers, completed the acquisition of DuPonts Wafer unit made of silicon carbide. The company’s main location is in Auburn, Michigan. This week SK Siltron has CSS announced plans to invest $ 300 million and create up to 150 jobs in Bay County, Michigan over the next three years. The company plans to provide manufacturing and R&D capabilities for advanced materials for electric vehicles.

Hitachi high tech has announced the foundation the Hitachi Center of Excellence in Portland, a new central semiconductor facility in Hillsboro, Ore.

NuFlare technology has Jun Takamatsu. called as the new president. Takamatsu will succeed Shigeki Sugimoto, who has retired. Takamatsu was the managing director at NuFlare.

advantage will rename it Office in Chennai, Tamil Nadu, India under the corporate mantle and will expand support for customer initiatives in the region. Effective June 18, w2bi Mobile Technologies (WMTI) will become Advantest India, a subsidiary of Advantest America. In 2013, Advantest America acquired w2bi (W2BI) and its subsidiary WMTI, a software developer exclusively for W2BI. Advantest India will contribute to the development of software for a variety of business units within Advantest.

Market research
Who is the leader in terms of manufacturing capacity? In December 2020, Taiwan was the world leader with 21.4% of the country’s installed global wafer capacity. South Korea followed in second place with a share of 20.4% of global wafer capacity. Taiwan was the capacity leader in 200mm wafers. For 300 mm wafers, South Korea came out on top, closely followed by Taiwan. ” according to a new research note of IC insights. Japan ranks third, followed by China, North America and Europe, according to the company.

Global OEM sales of semiconductor manufacturing equipment are projected to exceed $ 100 billion next year, a new high after rising 34% to $ 95.3 billion in 2021, compared to $ 71.1 billion in the Year 2020. according to a new report of HALF. “Regionally, Korea, Taiwan and China are expected to remain the top three equipment spending destinations in 2021, with Korea leading the way due to robust memory recovery and heavy investments in leading logic and foundries,” said SEMI.


Leave A Reply